Isotra Energy blind

	Upper profile	Lower profile	Lamella			Side guilding	Assembly
			Construction	Width (mm)	Thickness
Business name	IS 08	IS 16	whole shading	25	0,21 / 0,18	silon Ø 0,8 mm	for window wing
Dimensions (mm)	27 × 48 × 0,2	20 × 8 × 0,9	standard	25	0,21 / 0,18
Material	Al	Al	standard	16	0,21
Cross-section
Colour	Standard: RAL 9010 white RAL 1015 ivory RAL 1002 pine RAL 9006 silver RAL 8004 chestnut RAL 8014 brown Surcharge: other RAL colors sprayed		according to the actual sampler			silon - clear

Plastic components in the colour of the profile.
Ladder and cord which are colour coordinated with the lamella.

electric drive using solar energy – by remote control unit, button or solar regulator in combination with the remote control unit

Control diagram

Control variations

RZOVL remote control unit

Using the remote control unit, individual blinds and groups of blinds can be separately controlled from a distance up to 150 m. Up to 20 time starts can be individually set (using the automated system according to the adjusted time) for various blinds or groups of blinds.
Supply for the remote control unit: two 1.5 V batteries

RZTL wireless button

This button serves for tilting lamellas and for lifting up and lowering individual blinds or groups of blinds at the same time. This enables the possibility to set the end positions (stops) of the blind.
Supply for the button: small lithium battery

SRZSR Solar regulator

The solar regulator serves for tilting the lamellas of one blind or groups of blinds at the same time depending on the intensity of the sunlight.
The regulator is resistant to standard atmospheric conditions.
The solar regulator can only be used when combined with the programmable remote control unit.
Regulator supply: solar energy

• for window wing

Height of the packet = height of the lowered blind, including the upper profile.
CS* = whole-shading construction.
Hereby stated values are only indicative.