Exterior blinds

Self-supporting BRAVO and STS aluminium Venetian blinds

The basis of the self-supporting blinds are guide rails, on which the entire weight of the armour lies. The representatives of this special design of exterior blinds are the BRAVO and STS self-supporting blinds. All types and sizes of slats can be used for the self-supporting blinds, except for Cetta 50. An insect mesh can also be integrated into them.

Bravo is a self-supporting blind with a blind roll outside the channel and which has a round box design. With BRAVO, the box is always only in the recognized design, which means that it is visible on the facade of the house. A foot for connection to the supporting rails is located on the sides of the boxes. BRAVO blinds are designed for installation in smaller construction openings - thanks to a special hanger and eccentric channel mounting, the height of the box is 40 mm lower than the standard design.

The STS aluminium self-supporting blind is a separate all-aluminium final product. The upper profile (box), together with the slat pack, is attached to the guide rails using a special foot and hanger of the upper profile. Then only the guide rail brackets without any blind bracket can be used, as if it were necessary in the case of an ordinary installation of an exterior blind. The separate blind therefore no longer needs to be anchored. The principle is the same as for the VIVA product. Installation is simple and quick. Motor control only. Blinds can be coupled. You can choose almost all types of slats in the given colours, including flexi and in the design of a vertical bottom rail even SLIM is possible. It is not possible to select the Cetta 35/50 slat. It is possible to paint the upper and lower profile, guide rail, guide brackets in RAL and Decoral colours.

I am interested in this product

Advantages

Benefits & advantages

faster and easier assembly
high level of shading
thermoregulatory and protective effect
decrease in the level of outside noise
lower profile from the extruded aluminium
electric control option
decrease in the noise from the blinds.

Get

Inspiration

BRAVO self-supporting blind with the roll outside the channel

Specifications

Control: lowering, pulling up and tilting the slats by the motor,
location of the control is anywhere,
box height 40 mm lower than the standard design thanks to a special hanger and eccentric channel mounting
installation of the blind is only in the version with self-supporting guide rails,
standard design of the cover box is 210 mm,
choice of box, bottom and guide rails in DECORAL or RAL design,
maximum dimension 4000 mm.

Limited dimensions for Cetta 80 blinds Bravo

BRAVO	Widht (mm)		Height (mm)		Guaranteed area (m²)
BRAVO	min.	without insect screen

600 3500 500 3000 10,5 with insect screen 720 1800 500 2500 3

Using this version, you can save 40 mm of the box height (front cover height) compared to the standard version.
The maximum height of blind, which the box of 210 mm is suitable for.

Blind typ	Blind height (mm)
Cetta 60 Flexi	1900
Cetta 65	1900
Cetta 80	2200
Cetta 80 Flexi	3000
Cetta 80 Slim	2600
Cetta 100 Flexi	3000
Setta 65	1900
Setta 90	2700
Zetta 70	2100
Zetta 90	2500

Self-Supporting Exterior Blinds STS aluminium - separate all-aluminium final product

Standard blind dimensions

System STS	Width (mm)		Height (mm)		Guaranteed area (m²)
System STS	min.	max.	min.	max.	max.
blinds STS	600	4000*	500	4000	16

*From 3501 to 4000 mm, STS reinforcing profile will be supplied to the aluminium channel. The channel with the reinforcement will have by 15 mm wider roll.

Position	Item	Trade name	Drawing number
10	Pre-assembled box STS		2-01286-0000
30-32	Upper rail hanger – AL PROFIL STS	P002/6	2-01093-0000
40-41	Double foot STS	P002/9	2-01628-0000
170	Guide rail profile STS	P016/1	7-302121-PU52
170	Rail STS – double	P016/2	7-303530-0000
170	Guide rail bracket STS 56-80, 81-125, 80-230 mm	P021/5,6,17-47	-