Exterior blinds
CORNER corner blind
Product gallery
Corner exterior blinds in a coupled design are the best solution for corner portals of houses and buildings. Among other things, this product solves the problem of shading corner windows without a guide rail remaining in the centre and disturbing the overall view from the interior to the outside after the blind is pulled up. The slats are connected by a stainless-steel ball chain in a plastic guide. The lower slat profiles are connected with a metal angle piece inserted in a plastic corner. The corner blind can be used for both inner and outer corners, but always only for a 90° angle!
Advantages
Benefits & advantages
- shading of large corner windows
- without a central guide bar
- undisturbed view of the landscape
- one motor for both blinds
- use for inner and outer corner
- low height of the roll
- choice of two types of slats
Methods
Handling
electric
remote control or switch
Guaranteed
Dimensions
minimum width
600 mm
600 mm
maximum width
3000 mm
3000 mm
minimum height
500 mm
500 mm
maximum height
4000 mm
4000 mm
total guaranteed area of the blind without motor
7,2 mm2
7,2 mm2
total guaranteed area of the blind with motor
12 mm2
12 mm2
Details of the execution
Choice of slats
CETTA 80 FLEXI, ZETTA 90 and CETTA 80
Ask us
Are You interested in some product?
We will be pleased to answer your questions. Just fill in the form and we will respond till 3 workdays at least.
